Additional Images

Fuel Injection Control Module FICM Ford 6.0L

921-124
2005 - 2007 Ford 6.0L Power Stroke F-Series (01/05 thru 12/07)
2005 Ford 6.0L Power Stroke Excursion (01/05 thru 12/05)
2004 - 2009 Ford 6.0L Power Stroke E-Series (All)
Was: $449.98
Sale: $348.66
Save: 23%
Save: $101.32

Customize Your Item

- Select 'Core Charge' to Continue -
 * required
Qty:

Description

Pre Programmed Fuel Injection Control Module FICM
2005 - 2007 Ford 6.0L Power Stroke F-Series (01/05 thru 12/07)
2005 Ford 6.0L Power Stroke Excursion (01/05 thru 12/05)
2004 - 2009 Ford 6.0L Power Stroke E-Series (All)
Part # 921-124.
Replaces OEM Part # 4C3Z12B599ABRM, Alt # AP65124
12 month or 15,000 mile Limited Warranty

FICM Failures
The Fuel Injection Control Module (FICM) controls the fuel injectors on the 6.0L Power Stroke engine. It is responsible for stepping up the battery voltage to 48 volts, which is required to activate the injectors. The FICM works in conjunction with the Powertrain Control Module (PCM) to control the fuel delivery to the engine. The module is located on the engines valve cover, and is subjected to extreme heat and vibration which is the most probable cause of the FICM's high failure rate. A failed FICM will cause stalling or a no-start condition. If your FICM voltage is low, then you should see a DTC P0611 (Fuel Injector Control Module Performance).

Diagnostic Trouble Codes (DTC's) Related to a Failing FICM:
P0611 (Fuel Injector Control Module Performance)
P0261 (Injector Circuit Low - Cylinder 1)
P0264 (Injector Circuit Low - Cylinder 2)
P0267 (Injector Circuit Low - Cylinder 3)
P0270 (Injector Circuit Low - Cylinder 4)
P0273 (Injector Circuit Low - Cylinder 5)
P0276 (Injector Circuit Low - Cylinder 6)
P0279 (Injector Circuit Low - Cylinder 7)
P0282 (Injector Circuit Low - Cylinder 8)

Pre-Programmed and Ready to Install!
OEM replacement modules are expensive, and they come un-programmed and must be programmed by the installer prior to vehicle operation, which is a difficult and costly task for most independent repair facilities. Our professionally remanufactured FICM's are 100% torn down, upgraded and fully tested on a vehicle simulator. Once each unit passes initial testing, they are pre-programmed with the appropriate vehicle software and are ready for installation and operation. All you have to do is install it and drive it away! If you have any questions, please call us at (800) 823-4444.

6.0L Power Stroke FICM Application Guide
Model Year
F-Series Super Duty
Excursion
E-Series
2003
# 921-122
# 921-122
NA
2004
# 921-122 (to 9/22/03)
# 921-122 (to 9/22/03)
# 921-124
# 921-123 (after 9/22/03)
# 921-123 (after 9/22/03)
# 921-124
2005
# 921-124
# 921-123 ( to 01/01/05)
# 921-124
# 921-124 (after 01/01/05)
# 921-124
2006
# 921-124
NA
# 921-124
2007
# 921-124
NA
# 921-124
2008
NA
NA
# 921-124
2009
NA
NA
# 921-124

*Choosing the correct FICM for 2003 - 2004 F-Series Trucks and Excursions:
2003 thru early 2004 = ICP Sensor located near back of engine head (build date to 9/22/03)
Late 2004 up = ICP Sensor in passenger side valve cover (build date after 9/22/03)

Shipping Information

  • Item Requires Shipping
  • 8.0 lbs.


Have A Question?Ask the Pros!


Share Fuel Injection Control Module FICM Ford 6.0L on Facebook