Early 2006 (Build date before 5/06) Dodge Ram 2WD
ATS Built 48-RE Auto Trans
ATS 5 Star Viskus Clutch Drive Torque Converter
ATS Extra Deep Transmission Pan
ATS Billet Input Shaft
ATS CoPilot Torque Converter Lock-Up Controller
ATS Billet Flex Plate
Note: Must ship to an address with either a loading-dock or fork-lift. Item may not be available for Residential delivery. Expedited delivery is typically NOT available for freight items. If you select shipping options other than Ground or default method we may have to contact you if that service is not available or charges are different for your area. If you are unsure of any requirements, please contact us before making your order.
This item requires a Core Return or Core Charge
Please see link below for more information
Part # 3099422308
The 48RE transmission is the weakest point on a Dodge Cummins truck. Not only do they fail on trucks with minor upgrades, but even trucks in stock form have been known to be too powerful. A heavy duty truck needs parts which can stand up to heavy trailers, stop-and-go commutes to work, or high-horsepower applications. Thats why ATS modifies the transmission to make it the strongest and most reliable part of your drivetrain.
With the many shortcomings of the 48RE, none are more important than the clutch packs. This is what takes the power load and transmits it to the rear wheels. We increase the clutch count in the Forward, Overdrive, and Overdrive Brake clutch packs which allow much higher torque capacity in each gear. Clutch material is also essential which is why we use Borg Warner and Raybestos clutches which has both high torque strength as well as longevity and reliability.
Another important aspect is the hard parts on the transmission. The factory sheet metal strut anchor is replaced with a much stronger billet strut anchor, allowing more precision application of the band. Along with the factory plastic accumulator piston is replaced with a billet unit as well. The apply lever is a 1:5.0 ratio apply arm, which applies the borg warner red lining band. This band features a performance friction material capable of holding higher power levels.
One of the weakest points of a 48RE transmission is the stock input shaft. At increased power levels, towing weight or in performance applications, the stock input shaft can break or twist. When this occurs, the transmission will lose movement and can damage the converter, pump and transmission. ATS recommends using a billet input with increased power and/or towing capacity/frequency.
The theory behind a billet shaft is to increase the strength of the material and flex to absorb torsional loads. This allows it to reliably hold increase power levels. ATS' two piece billet input shaft is designed to increase the reliability of the transmission, withstand greater than stock power and torque converter lock-up in sooner-than-factory settings.
While billet shafts are not indestructible, billet 300M material, coupled with stringent design and testing make them far superior to stock input shafts.
Adding a co-pilot or commander to your transmission will put the control at your finger tips. One of the things that many people want to do is have a transmission that they can race on the weekends and still drive it everyday without having to deal with harsh shifts driving on the streets. With the transmission controller, we give you exactly that freedom. During everyday driving, the lower settings will give you smooth shifts during everyday driving, and at the track, the higher settings will give you full throttle shifting that are quick and crisp. Along with this you gain control over your torque converter and can bring it on faster or later depending on your driving style and likes.
ATS billet flexplates are SFI approved, meaning that they stand up to the toughest race application standards. These are crafted out of strong billet steel allowing your transmission to shift faster and harder with out running the risk of breaking the flexplate. The added strain of racing your high horsepower truck is put directly onto the flexplate, giving it much more pressure than the factory settings ever intended. The added strength allows this high-stress situation to be overcome, and transfer all those ponies to the wheels.
Write the First Review!
You must login to post a review.
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm