Home - Dodge - 2007.5 - 2018 6.7L Dodge Cummins - Fuel System Components - 2007.5-2018 Dodge 6.7L - Injectors & Nozzles - 2007-2018 Dodge 6.7L - Industrial Injection Injectors & Nozzles - 2007-2018 Dodge 6.7L Cummins - Industrial Injection - Dodge 6.7L Cab & Chassis Injectors
Additional Images

Industrial Injection - REMAN 31LPM Dragon Fly Injector -2007.5-2012 Dodge 6.7L (60HP) - Cab & Chassis


2007.5 - 2012 Dodge 6.7L

Single Injector - Be sure to change quantity to 6 if you need a full install set.

This item requires a Core Return or Core Charge

Please see link below for more information

Pricing: $342.95

Refundable Core Charge: $100.00
Free Shipping!


Industrial Injection - Reman 31LPM Dragon Fly Injector - 2007.5-2012 Dodge 6.7L (60HP) - Cab & Chassis

Part # 0986435519SEDFLY

This Dragon Fly series injector's nozzle has been extruded / honed twice for a 31LPM flow rating which is approximately 60HP over stock. This rating is perfect for a stock truck or truck with moderate upgrades looking to change out those tired injectors for something better. Typically you will see an increase in MPG and lower exhaust gas temperatures as a result. Lower MPG is only if you can keep your foot off the pedal ~ we know it is difficult when new-found horse power is available but under normal driving you will see an increase!


The Dragon Fly Series is completely safe for a stock CP3 pump and even legal for use in California where the R-Series are not!

Frequently Asked Questions!

You may have noticed that there are two types of remanufactured injectors that Industrial Injection offers ~ Either "Factory Reman" or "II Reman".

Factory Re-manufactured means that a Genuine Bosch re-manufactured stock injector is used as the base injector and then a freshly extruded/honed Industrial Injection nozzle is installed and calibrated to give you your desired percentage/HP over stock.

II or Industrial Injection Reman means that Industrial Injection uses the cores that are available to them or you send in your old injectors to rebuild. They then install their nozzles and calibrate to achieve your requested HP gains. They usually have plenty of cores to rebuild but sometimes will require you to send in yours to rebuild. The part numbers for those injectors are denoted with an "SE" near the end. If you are interested in having them rebuild your injectors this is a great way to have them done and bypass having to pay a core charge. Contact us on our toll free 1(800)823-4444 to check availability or arrange a rebuild!

LPM - Sometimes a rating of LPM is shown in the description of an injector or nozzle. LPM stands for Liters Per Minute. This is just the rating to show the highest potential flow at full fuel pressure and open throttle.


Shipping Information

  • Item Requires Shipping
  • 0.8 lbs.
  • W4.0000” x H3.0000” x L8.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.