BD - Xtruded Double-Stack Transmission Oil Cooler with Fan - 1/2" Tube - Dodge & Ford

Part # 1030606-DS-12

Quick firm shifting Automatic transmissions can't be beat at the race track. But, the HOT transmission oil has to be COOLED to stay on track.

• torque multiplying stators redirecting and shearing the oil;
• heat transfer when cooling down of the clutches as they are on the edge of slipping on the steels;
• end thrusting loads on the bushings transfer heat into the case.

BD's double stacked their proven Xtruded Trans Oil cores to deliver over 40,000 BTU/HR of cooling and over 350% temperature drop versus the factory system -- 136% better temperature drop than BD's standard single core kit.

• Inlet Oil Temperature - 250?F
• Oil Flow 7.8 GPM
• Air Flow 500 CFM @110?F 35% Humidity
• Using the same Micro Extruded bar technology as is in our air-to-air Charge Air Coolers, the 200 Micro Extruded passages in each cooler (400 total) provide a large surface area to transfer heat for external air flow cooling while
• turbulent oil flow design promotes a more complete cooling.

Large 5/8-inch ports prevents inlet/outlet restriction and furnace brazed rails have been tested to 300psi of pressure. The thermostatically controlled 80-watt, 10-inch, 800 CFM electric fan offers ultimate automatic oil temperature control.

Xtruded Double Stacked Transmission Oil Cooler packages are available to accommodate 1/2 and 5/8 transmission cooler lines and come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation &mdash no wasting time fabricating brackets out of scrap metal. The pre-wired loomed harness with fuse and relay comes with OEM style sealed connectors to resist elements.

Product Warranty: 1-Year Parts