BDS Suspension

4-1/2" Suspension Lift Kit - 2011-2019 Chevy/GMC HD 2WD 4WD w/o Overload 719H

0 review Write a Review
SKU: BDS719H
$2,327.93
$2,450.45
Free Ground Shipping (Continental US)

Short Description

Hurry up! Current stock:
4-1/2" Suspension Lift Kit - 11-19 Chevy/GMC HD 2WD 4WD

Part # 719H

BDS Suspension 2011-2019 Chevy 2500HD 2wd/4wd 4.5" No Torsion Bar Drop Suspension System.

Like many of our other IFS suspension systems for the Chevys, this 4.5" system is packed with the same features and benefits of the current 6.5" kit but designed for a lower lift height for those looking for a more modest setup. Like the 6.5" system, the 4.5" includes one piece crossmembers, differential drop brackets, ductile cast iron steering knuckles and bolt-on no torsion bar drop brackets that keep the torsion bars in the factory location at the frame. Also included are stainless steel front brake lines, extended sway bar links and differential skid plates. The front replacement steel splash guard with the BDS logo finishes out the front of the clean, high clearance design. In the rear, the system comes with a 2" block and u-bolt setup that levels the vehicle perfectly. For those looking for a little more height in the rear, the existing 3" rear block kits can be substituted in.


  • Tire & Wheel Combinations
  • 35" x 12.50" w/17 x 8 and 4-1/2" to 4-5/8" back spacing
  • 35" x 12.50" w/18 x 9 and 4-1/2" to 4-5/8" back spacing
  • 35" x 12.50" w/20 x 9 and 5" - 6" back spacing
  • Est. Installation: 8-10 hours
  • Difficulty Level (easy 1 - 5 complicated): 4

Important Kit Notes

  • 1. Torsion Bar Tool required to load/unload the torsion bars.
  • 2. Stock 17" & 18" wheels cannot be reinstalled.
  • 3. Stock 20" wheels cannot be reinstalled on 2015-2017 models
  • 4. Factory dually wheels cannot be reinstalled.
  • 5. Models with two piece rear driveshaft may require #121612.
  • 6. Top mounted rear overload spring equipped models require a different kit than non-overload equipped models. Be sure to select the correct option for your truck.
  • 7. Depending on the specific wheel and tire combination trimming may be required for 35x12.50s

Qty Part# Description
1 011218 11-15 Chevy HD 2" Rear Block w/o ovrld
1 021454 11-15 GM HD 4.5in Torsion Bar System
1 021650 11 GM HD 4.5-6.5in System (1of4)
1 021651 11 GM HD 4.5-6.5in System (2of4)
1 021652 11 GM HD 4.5-6.5in System (3of4)
1 021653 11 GM HD 4.5-6.5in System (4of4)
1 121650 11 GM HD Front Skid Plate
2 85613 NX² Shock Absorber
2 85758 NX² Shock Absorber

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

BDS Suspension - "No Fine Print Warranty"

BDS stands behind its products and that's evident by their No Fine Print Warranty. This warranty protects the original retail purchaser against breakage, bending, sagging, or any other usage failure. We don't care if you jumped your truck off a cliff, lit it on fire, rolled it down a hill, installed Chevy parts on your Ford, or even if you didn't read the instructions and cross threaded a bolt with too many Ugga Duggas! This "no fine print" lifetime replacement warranty extends to cover all BDS hard parts and includes a lifetime warranty on bushings! Exclusions would be product finish and wearable items as described below. All warranties require the customer to provide a Proof of purchase including Name, product, purchase date and price paid.

No Fine Print Warranty ~ If you are the original purchaser of any BDS product and it breaks, they will give you a new part. Period.


Wearable Parts | Limited Lifetime Warranty

BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.

Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here:  https://www.ridefox.com/service.php?m=truck

Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.

BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.