BDS Suspension

7" Lift Kit (FOX 2.0 Shocks) - 01-10 Chevy/GMC C2500 3/4 Ton 2WD 149FS

0 review Write a Review
SKU: BDS149FS
$2,383.12
$2,508.55
Free Ground Shipping (Continental US)

Short Description

Hurry up! Current stock:
7" Lift Kit (FOX 2.0 Shocks) - 01-10 Chevy/GMC C2500 3/4 Ton 2WD

Part # 149FS

This lift kit is based around two one-piece, 1/4" laser cut high clearance crossmembers and replacement steering knuckles. The high clearance crossmembers increase ground clearance for better looks and off road performance.

Compression struts are included with the lift kit to support the crossmembers under impact. The replacement steering knuckles ease installation as well as maintain proper steering and ball joint angles.

Optional single or dual steering stabilizers are also available for this 7" heavy duty lift kit.

  • Tire & Wheel Combinations
  • 35" x 12.50" w/16 x 8 and 4.5" back spacing
  • 35" x 12.50 w/17 or 18 x 9 and 5.5" back spacing
  • 35" x 12.50" w/20 x 9 and 5.75" back spacing
  • *Trimming may be required*

  • Est. Installation: 8-10 hours
  • Difficulty Level (easy 1 - 5 complicated): 4

Important Kit Notes

  • 1. Special tool required to unload/load the torsion bars.
  • 2. Will not fit non-HD applications.
  • 3. The 2WD HD was produced with two different styles of carrier bearing crossmembers. If the carrier bearing is mounted above the crossmember, use 121611. If the carrier bearing is mounted below the crossmember, use 121612.

Qty Part# Description
(1) 011507 01-06 GM 3/4 Ton Rear 5"
(1) 021620 01-06 GM Box 1 Of 3
(1) 021627 01-10 Chevy 2500HD 2wd Box Kit (2of3)
(1) 021628 01-10 Chevy 2500HD 2wd Box Kit (3of3)
(1) 121611 HD Carrier Bearing Drop
(2) 98224606 Fox 2.0 Shock 21.95 x 13.85 x 2- S50/EB1
(2) 98224761 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1


Vehicle Fitment Information

  • 2001 Chevy / GMC 1 Ton Truck 2WD
  • 2002 Chevy / GMC 1 Ton Truck 2WD
  • 2003 Chevy / GMC 1 Ton Truck 2WD
  • 2004 Chevy / GMC 1 Ton Truck 2WD
  • 2005 Chevy / GMC 1 Ton Truck 2WD
  • 2006 Chevy / GMC 1 Ton Truck 2WD
  • 2007 Chevy / GMC 1 Ton Truck 2WD
  • 2008 Chevy / GMC 1 Ton Truck 2WD
  • 2009 Chevy / GMC 1 Ton Truck 2WD
  • 2010 Chevy / GMC 1 Ton Truck 2WD
  • 2001 Chevy / GMC 3/4 Ton Truck 2WD
  • 2002 Chevy / GMC 3/4 Ton Truck 2WD
  • 2003 Chevy / GMC 3/4 Ton Truck 2WD
  • 2004 Chevy / GMC 3/4 Ton Truck 2WD
  • 2005 Chevy / GMC 3/4 Ton Truck 2WD
  • 2006 Chevy / GMC 3/4 Ton Truck 2WD
  • 2007 Chevy / GMC 3/4 Ton Truck 2WD
  • 2008 Chevy / GMC 3/4 Ton Truck 2WD
  • 2009 Chevy / GMC 3/4 Ton Truck 2WD
  • 2010 Chevy / GMC 3/4 Ton Truck 2WD

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

BDS Suspension - "No Fine Print Warranty"

BDS stands behind its products and that's evident by their No Fine Print Warranty. This warranty protects the original retail purchaser against breakage, bending, sagging, or any other usage failure. We don't care if you jumped your truck off a cliff, lit it on fire, rolled it down a hill, installed Chevy parts on your Ford, or even if you didn't read the instructions and cross threaded a bolt with too many Ugga Duggas! This "no fine print" lifetime replacement warranty extends to cover all BDS hard parts and includes a lifetime warranty on bushings! Exclusions would be product finish and wearable items as described below. All warranties require the customer to provide a Proof of purchase including Name, product, purchase date and price paid.

No Fine Print Warranty ~ If you are the original purchaser of any BDS product and it breaks, they will give you a new part. Period.


Wearable Parts | Limited Lifetime Warranty

BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.

Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here:  https://www.ridefox.com/service.php?m=truck

Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.

BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.