BD - 48RE Transmission Only with Tap Shifter - 2003-2004 Dodge 4WD 1064194FT

Part # 1064194FT

BD 48RE Transmissions for Dodge 2003-2007 are now available with an optional TapShifter Kit for the ultimate transmission set-up. Paired with a built BD transmission, you can now access all 4-gears and converter lock-up control with the push of a button.

No programming needed, the 48RE TapShifter allows automatic or full manual shifting for your 3rd gen Dodge. Street/Towing applications can take advantage of range select and TorqLoc functions. Racers can now have a manual valve body without sacrificing drivability and also have access to manual torque converter lockup in all gears at the tap of a button.

The TapShifter Kit includes a newer '68RFE' style shift lever, control module, gear selection display and a sealed plug-in wiring harness that does not require cutting or tapping of wires.

• All new bushings
• New design valve body
• Stock thrust washers replaced with roller Torrington bearings saves governor solenoids and reduces friction
• Drilled intermediate shaft for increased lube
• Modified manual valve for lube in all positions
• 47RE transmissions upgraded with more rugged 48RE components
• Clutch Count: OD 6
• Clutch Count: OD DIRECT 10
• New input shafts and hub
• Pan adds 1qt extra oil capacity
• Up to 80% higher clutch apply pressures over the stock unit
• Pressure increase starts at much lower engine rpm's and at lighter throttle pedal position movement
• Light throttle shift firmness is also maintained
• No shuttle shifting problems
• Upgraded governor pressure transducer (47RE/48RE)
• Upgraded governor solenoid - Twice the burst pressure than stock
• Cooler line case saver in every transmission
• Added heavy-duty clutches with up to 25% more material than stock
• Machined forward (rear) beveled pressure plate
• Machined overdrive brake (front & rear) pressure plate
• Machined direct clutch (front) piston
• High temp/energy Raybestos band
• Billet band strut & anchor
• Billet dual ring accumulator piston
• BD auxiliary full flow filter kit for extra protection
• Clutch Count: FORWARD 5
• Fully rollerized geartrain
• Clutch Count: DIRECT 6
• Increase the durability of your drivetrain
• Revised oil circuits
• Handles up to 300% more power and torque than the stock transmission
• Extra clutches and stronger internals
• BD rigid aluminum heavy duty transmission pan
• Pan reduces case flex
• Pan reduces internal oil leakage
• Pan heat-dissipating fins keep temperature down
• Pan magnetic drain plug
• Not warranted for Race or Sled Pull use
• Each transmission is dyno tested
• TAPSHIFTING CONTROL
• Tap Shifter for your 03-07 48RE gives gear selection and converter lock-up control
• Automatic or manual shifting of the transmission
• Great for Street, Towing and Race applications
• Provides manual torque converter lock-up clutch control
• Works with stock shifting and has gear limiting function
• Sealed plug-in wiring, no cutting or tapping of wires required
• Includes new model shift lever, BD control module, BD gear selection display and wiring harness

Warranty

Parts

• 36-Months
• 150,000 Miles

Labour

• 12-Months
• 24,000 miles

Note

• No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.