Hammerhead
BLACK X-SERIES FRONT WINCH CAPABLE BUMPER FULL BRUSHGUARD - 2006-2009 DODGE 2500-5500 600-56-0123
Part # 600-56-0433
Hammerhead's Front Bumpers Are Designed To Be Winch Capable And Stand Up To The Punishment Of On-Road And Off-Road Driving. This Front Bumper Accommodates Up To Four 3.25 Inch X 3.25 Inch External Dimension Cube After-Market Off-Road Fog Lights.
They Are Made With 3/16 Inch Thick Plate Steel And Are Reinforced To Allow For Extra Strength While Keeping The Bumpers As Light As Possible. The Shackle Mounts Are A Part Of The Mounting Surface To The Frame, Extending Through The Bumper Thick Plate Steel On The Inside And Outside Of The Bumper.
The X-Series Style Brushguard Is Made With 1.75 Inch X 0.120 Inch Wall Tubing. This Front Bumper Will Accommodate The Front Factory Sensors. This Bumper Will Fit The Power Wagon - However, You Will Need To Purchase An Additional Fairlead To Maintain Winch Functionality.
The Fairlead Will Need To Be Bolted To The Hammerhead Bumper. Some Modification And/Or Replacement Of The WInch's Engagement Lever May Also Be Necessary. Minor Modifications To The Oe Winch Mount Bracket Will Be Required.
Note: Hammerhead Armor Cannot Guarantee That Your OEM Sensors Will Function Properly With Our Bumpers. Note: For All 2010 Model 4500-5500, Please Provide Vin Number And Photo Of Front End To Verify Front End Fit Due To Half Year Model Split.
Hammerhead Armor Prides Itself On The Fit And Finish Of Every Product That We Offer. However, Due To The Vast Variety Of Offerings And Sizes Of After Market Fender Flares, We Cannot Guarantee That The Outer Tubes Of Our Full Brush Guard Bumpers Will Allow For Over-Sized Fender Flares To Be Installed On A Vehicle.
Always Be Sure To Test Fit Our Products To Verify Fitment With Another Manufacturer's Product Before The Final Installation.
Details:
WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov