BLACK X-SERIES FRONT WINCH CAPABLE FULL BRUSHGUARD BUMPER - 2017-2021 FORD F250-F550 600-56-0588

Part # 600-56-0588

NOTE: THIS BUMPER DOES NOT WORK WITH ADAPTIVE CRUISE.

NOTE!!! ON THE F450 AND F550 THE BUMPER WILL NOT EXTEND TO THE OUTSIDE LIMITS OF THE LARGER F450 and F550 FENDER FLARES!!!

Hammerhead's Front Bumpers Are Designed To Be Winch Capable And Stand Up To The Punishment Of On-Road And Off-Road Driving. This Front Bumper Accommodates Up To Four 3.25 Inch X 3.25 Inch External Dimension Cube After-Market Off-Road Fog Lights.

They Are Made With 3/16 Inch Thick Plate Steel And Are Reinforced To Allow For Extra Strength While Keeping The Bumpers As Light As Possible.

The Shackle Mounts Are A Part Of The Mounting Surface To The Frame, Extending Through The Bumper Thick Plate Steel On The Inside And Outside Of The Bumper. The X-Series Style Brushguard Is Made With 1.75 Inch X 0.120 Inch Wall Tubing.

Note: Currently, This Bumper Will Not Work With The Adaptive Cruise Control Feature. Hammerhead Armor Prides Itself On The Fit And Finish Of Every Product That We Offer.

However, Due To The Vast Variety Of Offerings And Sizes Of After Market Fender Flares, We Cannot Guarantee That The Outer Tubes Of Our Full Brush Guard Bumpers Will Allow For Over-Sized Fender Flares To Be Installed On A Vehicle.

Always Be Sure To Test Fit Our Products To Verify Fitment With Another Manufacturer's Product Before The Final Installation.

Details:

• Application 2017-2021 Ford F250-550
• Series X Series
• Location Front
• Sold As Each
• Material 0.1875 Inch Plate Steel
• Color Black
• Finish 2-Stage Powder Coat
• Weight 215 Pounds
• This bumper will also accommodate up to a 16.5K Super Winch so if your winch will fit in the same area it should work properly.  This winch will be mounted foot forward which means the winch will be rotated and mounted to the front wall of the bumper on the inside of the bumper.  If you need to clock your winch please refer to the manufacturer of your winch for directions.