Carli - Performance 2.5 Long Arm Shock Package - 2003-2012 Ram 2500/3500 Diesel - CS-DPER25SPKG-03-D-LA - BUNDLE

Carli specific, blueprinted, Long-Travel King 2.5” shocks on all four corners. For the Long Arm system, we designed a second, off-road oriented 5-Port custom piston opposed to the 3-Ports in a short-arm Pintop 2.5” System. This piston and long arm tuning profile alters flow of the pressurized shock oil displacing a wider surface area of the tuning shims to increase bottom-out on sharp hits while providing a predictable, comfortable street ride.  We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55* F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

Both Axle Truss and Rear Shock Mounts HIGHLY Recommended.  This is NOT a complete lift kit - it's a shock package made to compliment an already existing 3" Carli Long-Arm lift kit or upgrade one.

Carli Performance 2.5 Shock Set, Long Arm Valving, 2003-12 Ram 2500/3500, Diesel

• King 2.5 remote reservoir front shocks and piggyback reservoir rear shocks valved to be ran in conjunction with Carli 3" Long Arm Systems.
• This shock package requires but does not include Carli Fabricated Shock Towers (CS-DFST625).
• Includes reservoir mounts and limiting straps.
• Compatible ONLY with Carli 3" linear rate front springs & Carli rear full spring pack.
• Features 17-4 stainless shafts for durability and longevity.