The Carli Axle truss is designed with the hardcore off-roader in mind. This is for the off-roader who routinely pushes the limits of their truck. Highly recommended when running the Carli Unchained or Dominator System.
CARLI 14-24 RAM 2500/3500 4X4 WIY (Weld It Yourself) BUILDER AXLE TRUSS
- Fully weld-on and should only be installed by experienced fabricators.
- Features 1/4″ Cold Rolled Steel Construction with full-length internal X-Bracing.
- Includes Upper C Gussets & Lower C-Doubler Plates.
The axle on the 2014+ Ram 2500/3500 is a whole different animal from the previous generation. The large pumpkin, CAD bracket and outer C’s don’t make for an easy welding job. That said, we’ve designed a truss kit that runs a 1.75″ Diameter 0.120″ wall thickness tube that’s CNC Cut/Bent to match the knuckle profiles while skidding the pumpkin. Included with the truss kit are two 1″ OD stand-off tubes that bridge the distance from the truss tube to the main axle tube on the passenger’s side (long side) then plates to enclose the entire truss. Lastly, we include “Upper C” Gussets to plate the outer C upper to the bottom of the coil buckets.
This is the strongest truss kit on the market and requires SUBSTANTIAL fabrication knowledge/ability to install. There are no instructions; take it to a fabricator with extensive knowledge in welding differentiating metals. This is NOT a kit for someone just learning fabrication & welding...
Kit does not include front differential guard shown in photos.
