Fuel Injection Control Module (FICM) - 58 Volt - PHP Tuned - 2005-2009 Ford 6.0L Power Stroke
Your Vehicle Identification Number (VIN) is required to ensure correct programming.
This is a completely rebuilt and pre-programmed replacement fuel injection control module (FICM) for your 2005-2009 Ford F-250, F-350, F-450, F-550, or Excursion with engines built after 1/1/05 and E-SERIES 2004-2009.
Features:
- 58 Volts enables quickest injector response
- Resolves many cold-start issues
- Usually results in more MPG
- Improves tip-in throttle response
- Results in better overall drivability from idle up through 3500 rpm
- Proven performance gains
- Eliminates annoying injector post buzz
- Works with most ECM tuning
Choose one of four PHP tunes
- ECONOMY – Improved throttle response and economy without any significant power gains. Good for all applications, but generally used when the ECM has a high horsepower tune and additional fueling is not desired.
- ATLAS 40 – Improved throttle response and economy with a 40 HP gain. Useful for mild to heavy towing or when excessive exhaust gas temps (EGTs) are a concern. Good for trucks without head studs.
- ATLAS 80 – Improved throttle response and economy with an 80 HP gain. Best for daily driving or very light towing.
- HERCULES – Maximum performance with a 100+ HP gain. Not recommended for towing as it can increase EGTs. It’s recommended you run an EGT probe to monitor temps. NOT RECOMMENDED FOR TRUCKS WITHOUT HEAD STUDS.
