1989 - 1998 Dodge 5.9L Cummins 6BTA & 12V ISB
Turbo Mount, Vacuum Activated
Part # 2033135
Turbo Mount, Vacuum Activated.
The Original Exhaust Brake for Diesel Pick-Up Applications
Increase your driving confidence and towing safety with the superior retarding performance of the BD Brake for 89-06 5.9 liter Cummins engines. Using BDs exclusive Variable Orifice Technology, BDs turbo-mount design bolts in place of the factory elbow between the turbo and the exhaust system, providing peak retarding power throughout the engines rpm rangenot just at high rpm like other brands. Our remote-mount models, meanwhile, mount in the exhaust pipe and are perfect for modified applications that may use an aftermarket turbo.
Designed for years of reliable operation, the BD Brakes rugged cast-iron housing incorporates BDs exclusive AlumiBronze bushing and piston ring-sealed, stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment. Actuated by an air cylinder (newer models) or a powerful, three-inch vacuum cylinder (earlier models), the offset butterfly valve wont stick, and has been strategically placed in the elbow so that it wont impede exhaust flow when in the open position. The BD brake incorporates a threaded port for mounting an EGT Exhaust Gas Temperature probe, as well as a 1/4-inch stainless steel port that can be used to monitor the brakes retarding performance. Got a modified or twin-turbo application? BDs remote-mount or vacuum-actuated four-inch kits are an effective solution.
Controlled by a lighted On/Off toggle switch for automatic transmissions, or stick-mounted rocker switch for manual transmissions, the BD brake communicates with the engines electronic idle verification board for quick engagement. The durable air compressor included in later model kits can even be used for other applications. It's that tough.
Automatic-equipped trucks prior to 2006 require BDs programmable Tow Loc and Pressure Loc kits to electronically control torque converter clutch engagement. This addition effectively reduces slippage, resulting in peak retarding performance as well as lower transmission temperatures. All BD Brake kits come complete with the brake, air compressor (where applicable), mounting hardware and complete instructions.
Product Warranty: 2-year parts / 1-year Labor
Automatic Transmissions For best retarding results use a TowLoc, AutoLoc or TorqLoc
1989-1998 12-valve engines require 1030060 exhaust valve spring kit
1989-1993 turbo mount brakes require 1040050 down pipe kit
1996-1998 California spec engines with EGR require 1030030 Kit
Write the First Review!
You must login to post a review.
California Residents: Prop 65 Warning
WARNING: Cancer and Reproductive Harm