South Bend Clutch

South Bend Clutch 400HP Single Disc (With Flywheel) - 1988-2004 Dodge 5.9L Cummins 13125-OK

0 review Write a Review
MPN: 13125-OK
$849.18
Free Ground Shipping (Continental US)

Short Description

Hurry up! Current stock:
South Bend Clutch 400hp Street Single Disc Clutch Kit - 1988-2004 Dodge GETRAG/NV4500/NV5600
Part # 13125-OK


400HP, 800 torque Organic Disc Clutch

This South Bend Clutch Converts stock 12 1/4" flywheel to larger 13-1.25" flywheel and 400 horsepower heavy duty performance clutch assembly. Complete Clutch Replacement Kit, comes with everything you need to do the job, including Throw Out Bearing, and Stock Needle Pilot Bearing, and alignment tool. *88-93 Getrag trans must re-use stock crank bolts*

This Dyna Max kit features a performance organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed NON-High Output 12 1/4" clutches. We have taken the 13" High Output clutch and modified it to accept the 1 1/4" input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4" clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 400 horsepower & 800 ft. lbs. of torque.



Includes:
  • 13125-OK Organic Disc Clutch
  • 167890-5 Flywheel
  • Alignment Tool


Application:
  • 1988-1993 Getrag 5-Speed
  • 1994-2004 NV4500 5-Speed
  • 1999-2000.5 NV5600 6-Speed 235HP Dodge Non-HO without High Output


NOTE: It's very important to Break-In your clutch with 500 miles of stop and go driving before you pull a load. Your clutch will last longer if you avoid down-shifting whenever possible. Down-shifting flexes the pressure plate, causing uneven wear. Just remember, Use your breaks instead--they're are a lot less expensive to replace!



Recommended Hydraulic Assembly Upgrade:
1994-1997 Hydraulic Assembly Hyd-HD
1998-2002 Hydraulic Assembly Hydx1.50
2003-2004 Hydraulic Assembly Hydx.750

Warranty: 1 year, 12,000 miles, whichever comes first, manufacturer defects only.

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov