BDS Suspension

4" 4-Link Suspension Lift Kit - 13-18 Dodge RAM 3500 4WD Diesel 697H

0 review Write a Review
MPN: 697H
$1,783.44
Free Ground Shipping (Continental US)

Short Description

Hurry up! Current stock:
BDS Suspension - 4" 4-Link Suspension Lift Kit - 2013-2018 Dodge RAM 3500 4WD Diesel

Base Kit Id 697H


The latest suspension system option to come from BDS is a complete conversion system for the new radius arm suspension on the 2013-18 Ram 3500.

Like our popular 2005-2016 Ford Super Duty systems, we replace the factory radius arm setup for 4-link system. The design starts with 2 massive frame brackets that provide the mounting points for the new upper and lower control arms. These brackets locate off of the factory radius arm brackets, no factory bracket removal required.

The new 4-Link brackets mount similar to the current radius arm relocation brackets, wrapping the frame and nesting in the factory radius arms mounts. As with our radius arm brackets, there is a minor amount of welding required to install the threaded frame insert (1 per side). This insert is necessary to provide the strongest possible mount. The new control arm positions at the frame create better suspension geometry and reduce caster change through wheel travel compared to the radius arm setup. This creates better handling and more controlled steering "feel", especially in rough terrain when the suspension is allowed to travel and articulate. The large diameter, heavy-wall tubular control arms are formed for tire clearance when turning and position the axle slightly forward from stock to create more clearance to the rear portion of the front fenders.

As with the current BDS 4" radius arm kits, the new front coils spring are progressive rate in order to provide excellent on road ride and offroad performance. Track bar relocation, a dropped pitman arm and brake line relocation round out the front portion of the system.

The rear is lifted via block and new ubolts to achieve a level stance. Available with both NX² series and Fox/BDS 2.0 shocks as well as with an expanding list of accessories we offer for the new Ram.

  • Tire & Wheel Combinations
  • 37" x 12.50 w/17" x 9" and 5.625" back spacing
  • 35" x 12.50" w/18" x 9" and 4.5 back spacing
  • 35" x 12.50" w/20" x 9" and 4.5 back spacing
  • *Trimming may be required*

  • Est. Installation: 5 hours
  • Difficulty Level (easy 1 - 5 complicated): 3

Important Kit Notes

  • 1. For rear leaf spring equipped models only.
  • 2. The carrier bearing drop kit (122405) is necessary for models equipped with two piece rear drive shaft.
  • 3. Will not fit Cab and Chassis models

Qty Part# Description
1 012317 2013 Ram 3500 3in Rear Box w/4in axle
1 012403 2013-2015Ram 3500 4-Link Box Kit (2of2)
1 012414 2013-14 Ram 4-Link Box Kit (1of2)
1 032401 13 3500 - 14 2500 Ram 4in Coils - Diesel
2 85752 NX² Shock Absorber
2 85759 NX² Shock Absorber

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

BDS Suspension - "No Fine Print Warranty"

BDS stands behind its products and that's evident by their No Fine Print Warranty. This warranty protects the original retail purchaser against breakage, bending, sagging, or any other usage failure. We don't care if you jumped your truck off a cliff, lit it on fire, rolled it down a hill, installed Chevy parts on your Ford, or even if you didn't read the instructions and cross threaded a bolt with too many Ugga Duggas! This "no fine print" lifetime replacement warranty extends to cover all BDS hard parts and includes a lifetime warranty on bushings! Exclusions would be product finish and wearable items as described below. All warranties require the customer to provide a Proof of purchase including Name, product, purchase date and price paid.

No Fine Print Warranty ~ If you are the original purchaser of any BDS product and it breaks, they will give you a new part. Period.


Wearable Parts | Limited Lifetime Warranty

BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks:
Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.

Fox Proprietary Shocks and Coil Overs:
Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be
found here:  https://www.ridefox.com/service.php?m=truck

Ball Joints and Tie Rod Ends:
These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.

BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.