This unique High Clearance suspension lift kit utilizes high arched crossmembers that blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 7"dramatically increasing ground clearance at the front crossmembers and improving operating geometry. Torsion bars are mounted directly to the top of the lower a-arm eliminating the need to drop the torsion bar crossmember.
A front skid plate and differential skid plate come standard, to lock everything together, creating a nearly indestructible sub frame for extreme off road protection.
The rear is lifted with a flat 5" block for easy installation. Upgrade to Glide-Ride Leaf Springs for reduced axle wrap and more control while towing.
This highly customizable kit gives you the choices you need to build your rig your way. With standard or narrow track knuckles, gas shocks and dual steering stabilizers as just a few of the options and upgrades available for this 7" Chevy/GMC suspension lift kit.
Check out the install article done by Four Wheeler Magazine.
Tire & Wheel Combinations
2001-2007 Classic Body Style
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
35" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
37" x 12.50" w/20 x 9 and 5.75" back spacing
2007-2010 New Body Style
35" x 12.50" w/16 x 8 and 4-1/2" back spacing
35" x 12.50" w/17 or 18 x 9 and 5.5" back spacing
35" x 12.50" w/20 x 9 and 5.75" back spacing
Tire & Wheel Combinations
*Trimming may be required*
Est. Installation: 8-10 hours
Difficulty Level (easy 1 - 5 complicated): 4
Important Kit Notes
1. Torsion Bar tool required to load/unload the torsion bars.
2. Some welding required.
3. Requires frame bracket modification and differential mount modification.
4. Traction bars will NOT fit standard cab/short box models and are designed to work on vehicles with 4" to 8" of lift. Will NOT work on long bed models.
5. 20" wheels with 5" to 5-3/4" backspacing recommended to reduce trimming.
6. Gas models require exhaust modification.
7. Narrow track knuckle will slightly increase turning radius.
8. For tail high stance use #119157 add-a-leaf with the block kit or #069207 with leaf spring kit.
9. Dually applications will require custom u-bolts.
WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
BDS stands behind its products and that's evident by their No Fine Print Warranty. This warranty protects the original retail purchaser against breakage, bending, sagging, or any other usage failure. We don't care if you jumped your truck off a cliff, lit it on fire, rolled it down a hill, installed Chevy parts on your Ford, or even if you didn't read the instructions and cross threaded a bolt with too many Ugga Duggas! This "no fine print" lifetime replacement warranty extends to cover all BDS hard parts and includes a lifetime warranty on bushings!
Exclusions would be product finish and wearable items as described below. All warranties require the customer to provide a Proof of purchase including Name, product, purchase date and price paid.
No Fine Print Warranty ~ If you are the original purchaser of any BDS product and it breaks, they will give you a new part. Period.
Wearable Parts | Limited Lifetime Warranty
BDS NX2 Series Shocks and BDS/Fox Performance Series Shocks: Shock oil seals are not covered by this Limited Lifetime Warranty because they are subject to wear over time and use. At BDS's discretion, leaking shock seals less than 2 years from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for repair or replacement under warranty. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion.
Fox Proprietary Shocks and Coil Overs: Fox Proprietary parts are covered by their warranty and are not included in the BDS Warranty. BDS may offer to assist with the warranty of defective product, at our discretion. Other warranty concerns should be handled through the Fox Service program. Leaking shock seals less than 1 year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty. FOX service information can be found here: https://www.ridefox.com/service.php?m=truck
Ball Joints and Tie Rod Ends: These items are subject to normal wear over time. However, Ball Joints and Tie Rod ends less than 3 years from the date of purchase, that have been properly greased, maintained, and do not show signs of abnormal use can be considered for warranty.
BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. BDS will cover the cost of ground shipping on warranty items, and a return shipping label if we require the warranty part to be returned to us. Any cost of removal, installation or reinstallation, expedited freight charges, incidental or consequential damages are expressly excluded from these warranties. Proof of purchase is required for all warranty claims.
4-1/2" Suspension Lift Kit (Standard Knuckle) (FOX Shocks) - 01-10 Chevy/GMC HD 4WD
Part # 192FS
This unique High Clearance suspension lift kit utilizes high arched crossmembers that blend perfectly...
7" Lift Kit (NX2 Shocks) - 01-10 Chevy/GMC HD 4WD Part # 189H This unique High Clearance suspension lift kit utilizes high arched crossmembers that blend perfectly with the angle of the factory...
7" Lift Kit (FOX 2.0 Shocks) - 01-10 Chevy/GMC C2500 3/4 Ton 2WD Part # 149FS This lift kit is based around two one-piece, 1/4" laser cut high clearance crossmembers and replacement steering knuckles...
4.5" Coil-Over Lift Kit (FOX 2.5) - 01-10 Chevy/GMC HD 4WD Part # 740FDSC This system builds on the BDS high clearance system design offering more ground clearance or correct suspension, steer,...
6.5" Coil-Over Lift Kit (FOX 2.5) - 01-10 Chevy/GMC HD 4WD Part # 738FDSC At the heart of the systems you'll find BDS's tried and true high clearance IFS technology designed to offer more ground...
BDS stands behind its products and that's evident by their No Fine Print Warranty. This warranty protects the original retail purchaser against breakage, bending, sagging, or any other usage failure. We don't care if you jumped your truck off a cliff, lit it on fire, rolled it down a hill, installed Chevy parts on your Ford, or even if you didn't read the instructions and cross threaded a bolt with too many Ugga Duggas! This "no fine print" lifetime replacement warranty extends to cover all BDS hard parts and includes a lifetime warranty on bushings!
Exclusions would be product finish and wearable items as described below. All warranties require the customer to provide a Proof of purchase including Name, product, purchase date and price paid.
