Kryptonite - Stage 3 Leveling Kit with Bilstein Shocks - 2020-2024 GM 2500/3500 HD Truck
Part # KR20STAGE3BIL
(This Package is designed to level the front of your truck a maximum of 2 inches! Any adjustment beyond 2 inches over stock height will most likely result in complete front shock failure!)
Kryptonite leveling kits are the fastest, safest, least expensive way to bring the front of your GM HD Truck 2 inches closer to the rear. Our torsion keys are designed to grab the “FLAT” of the torsion bar for a tighter, sturdier fit. Kryptonite torsion keys are forged, making them 25% stronger than OEM and primed to last the life of your vehicle.
The adjustable torsion key provides 1” to 2” of lift and gives clearance to add up to 34" wheels and tires to your GM HD Truck. Designed to keep the OEM ride and will not add more pressure on the stock suspension components. Through our innovative engineering, these kits cost thousands less than a traditional lift kit.
Kit Includes everything needed for installation:
- 1 x Kryptonite Upper Control Arm Pair
- 4 x Control arm sleeves
- 8 x Control arm Bushings
- 2 x Kryptonite Bolt on Upper Ball Joints
- 1 x Hardware package
- 2 x Leveling Keys
- 2 x Fox 2.0 Performance Series Front Shocks, Part# KRS189
- 2 x Fox 2.0 Performance Series Rear Shocks, Part# KRS664
Optional:
- KRYPTONITE CAM BOLT KIT Part# KR86376
- Recommended when replacing the Upper Control Arms.
- 1x Kryptonite Alignment Pins Part# KR86326
- These pins replace the alignment pins in the GM vehicles listed. The pins make it easier to align the vehicle and often become bent or crushed and need to be replaced. This kit includes 8 pins.
*Note; Some trucks come preadjusted over stock height from factory ie, AT4, Z71, High country and Denali HD. The same measurements of increased ride height will not apply. We do not recommend the Bilstein shocks for these model trucks. Shock Failure can result.
Warnings: This Package is designed to level the front of GM trucks a maximum of 2 inches! Any adjustment beyond 2 inches over stock height will most likely result in complete front shock failure!
