Pusher - Intake System - 2020+ Ford 6.7L F250/F350 Powerstroke - PFP20XXIS

Part # PFP20XXIS

Our hot pipe will not fit PPE intercoolers. If you have a PPE intercooler, please note it in the order notes at checkout.

This product is not emissions compliant. Off-road use only.

The Pusher Intake System for 2020+ Ford F250/350 6.7L Powerstroke trucks is a culmination of years of extensive research, design, and testing to achieve perfectly balanced air delivery to the 6.7L Powerstroke while encompassing maximum compatibility with a wide range of turbo configurations. This system replaces the restrictive factory intake manifold, plastic cold-side charge tube, and cold air intake assembly for a complete performance upgrade.

The Pusher Intake Manifold is engineered to deliver maximum airflow evenly to each cylinder head, optimizing engine performance. Both the cold-side charge tube and cold air intake are designed with the shortest, most efficient flow paths for superior results. An aluminum filter box integrates seamlessly with the factory grill ducting, creating a true cold air intake system.

What’s in the box?

(1)  Pusher Intake Manifold
(1)  Pusher 3" Charge Tube
(1)  Pusher Cold Air Intake Upper
(1)  Pusher Cold Air Intake Lid
(1)  Pusher Air Intake Lid Window
(1)  4.5 x 8.75" 45CAL Air Filter
(1)  4.5 - 4” Reducer Ring 
(1)  3" Straight 5-Ply Silicone Coupler
(1)  3-2.75" 90° Reducer 5-Ply Intercooler Outlet Coupler
(1)  4" Straight 5-Ply Silicone Coupler
(3)  3" T-Bolt Clamp
(1)  2.75" T-Bolt Clamp
(2)  4" Worm Drive Clamp
(1)  Breather Adapter for 2011+ Ford 6.7L Powerstroke
(1)  40” Straight 1” Parker Push-Lok
(1)  Intake Air Temperature Sensor Bracket 
(2)  Powerstroke Intake Manifold O-Ring
(8)  M6 x 1 x 25mm Flange Bolt
(8)  M6 x 18 mm Fender Washer 
(2)  M5 x 0.8 x 12 mm Button-Head 
(2)  M4 x 0.7 x 12 mm Button-Head 
(1)  40” Foam Gasket
(4)  1/4-20 Rubber Washer
(4)  1/4-20 Wide Phillips Screw
(4)  1/4-20 Clip Nut