Randy's Transmissions

Randy's Transmissions - 48RE Stage 4 (1000HP and UP) Transmission + Goerend Torque Converter w/TVV Stepper Motor - 04.5-07 211265016

0 review Write a Review
SKU: R/T211265016
$10,395.00
Freight (Continental US): +$600.00

Short Description

Refundable Core Charge: $1800

More Information

CORE CHARGE OPTIONS

Core Charge Agreement - If selecting to SEND CORE IN FIRST above, I understand that I will need to send in my core items first and have them accepted before the shipment of the new part or parts is authorized. If I select to pay the core charge, I understand that my part or parts can ship as soon as available.
Hurry up! Current stock:
48RE Stage 4 (1000HP and UP) Transmission + Goerend Torque Converter w/TVV Stepper Motor - 04.5-07

Part # 211265016

Randy's Transmission has garnered a well earned reputation for building some of the best performance and competition use transmissions you can find, anywhere. Using quality components and know-how that can only come from years of running their own 2000+ HP truck, you can see why.

Stage 4 1000hp and up with Sonnax oversized input shaft

  • GPZ Clutches, New koline steels
  • Power-packed overdrive with custom pressure plate
  • TCS Billet direct drum with powerpack
  • Sonnax super servo, Billet band strut, Billet wedge
  • Billet Accumulator
  • Billet 4.2 lever
  • Sonnax Billet Input shaft “OVERSIZED”
  • Goerend Torque converter, custom stalls available
  • Ridged 2ng gear band
  • H/D direct drum piston
  • Borg Warner Governor pressure solenoid
  • High pressure transducer
  • Mag-Hytec deep pan
  • Billet maraging intermediate shaft
  • Big daddy output shaft
  • Custom high pressure valve body
  • Add full manual valve body +$399 includes billet reverse servo

This is the same transmission as in our 2000hp Daily Driver 2006 9.4 @150.77 second 7640lb Dually,

Also backing up Master Shredder and propelling it into a 8.8 second ¼ mile run @157mph during the UCC.

And same internals as our record shattering run in the 
Industrial Injection drag truck weighing in at 5445 pounds on leafs running 8.07 @180mph during the UCC.

NOTE: use of a billet flex plate is recommended for Stage 1 and necessary for Stage 2 and UP!

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

1 Year 12,000 mile limited warranty (Stage 3 & 4)
1 Year 12,000 mile limited warranty will not cover broken cases or shafts of transmission. Abuse, misuse, or burn down due to operator error will void warranty. Any warranty work must be performed at Randy’s Transmissions in Tooele UT. It is the vehicle owner’s responsibility to ship transmission or vehicle to Randy’s location for any and all repairs needing to be performed. Any repairs to transmission not authorized by Randy’s Transmissions will void warranty and will not be covered by Randy’s Transmissions.



HOT SHOT AND PLOW TRUCK DRIVERS: WARRANTY IS 12 MONTH / 12,000 MILES.
PLEASE NOTE: IF YOU ARE INSTALLING A TRANSMISSION YOURSELF, IT IS YOUR RESPONSIBILITY TO HAVE THE TRANSMISSION COOLER FLUSHED BY A PROFESSIONAL PRIOR TO TRANSMISSION INSTALL. FAILURE TO DO SO, MAY RESULT IN CONTAMINATED FLUID AND OLD MATERIAL GETTING INTO THE NEW UNIT.
POURING ATF THROUGH THE COOLER IS NOT SUFFICIENT ENOUGH.
IT IS YOUR RESPONSIBILITY TO READ ANY LITERATURE THAT MAY COME WITH YOUR TRANSMISSION OR OTHER COMPONENT REGARDING ADDITIONAL STEPS THAT MUST BE TAKEN IN ORDER FOR A PROPER INSTALLATION & FUNCTION OF THE UNIT.

For the first 90 days of warranty we will pay Shipping to shops due to a covered failure. R&R labor at this time is a case-by-case basis. Fluids and incidentals are not covered.
*WARRANTIES ARE NON-TRANSFERABLE*