Banks Engineering
Banks - Intercooler System W/Boost Tubes 99.5 Ford 7.3L 25971
Part # 25972
Banks Techni-Cooler Intercooler system includes mandrel-bent 3 Inchhigh-flow boost tubes ... large, high-efficiency all-aluminum end tanks instead of the wimpy stock plastic ones that can rupture under high-boost conditions ... a high-flow inlet that distributes air evenly across the intercooler for 18 percent and increase in flow and more effective cooling ... a wide-open outlet ... and a thicker core area with impressive volume.
Because the stock manifold inlet in early '99 Power Strokes flows more air to one side of the cylinder bank than to the other, Banks developed an innovative Twin-Ram manifold inlet assembly that flows air equally to both sides of the engine for smooth, even power delivery.
Note: Twin-Ram is available for 1999 and 1999-1/2 (early) models only (not required for late '99 later vehicles).
Techni-Cooler provides the maximum reduction in boost air temperature with a minimal loss of boost pressure. Cooling the air makes it denser and more oxygen rich, improving combustion and engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. What could be cooler than that? Mounting.
Fitment Notes: 1999 - Ford - F-250 1999 - Ford - F-450 Super Duty 1999 - Ford - F-550 Super Duty 1999 - Ford - F-350
WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov