Part # 25973
Techni-Cooler provides the maximum reduction in boost air temperature with a minimal loss of boost pressure. Cooling the air makes it denser and more oxygen rich, improving combustion and engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. What could be cooler than that? Mounting. Banks Techni-Cooler Intercooler system includes mandrel-bent 3 inch high-flow boost tubes - large, high-efficiency all-aluminum end tanks instead of the wimpy stock plastic ones that can rupture under high-boost conditions - a high-flow inlet that distributes air evenly across the intercooler for an 18 percent increase in flow and more effective cooling - a wide-open outlet - and a thicker core area with impressive volume. Because the stock manifold inlet in early 1999 Power Strokes flows more air to one side of the cylinder bank than to the other, Banks developed an innovative Twin-Ram manifold inlet assembly that flows air equally to both sides of the engine for smooth, even power delivery. Eliminates restrictions, dramatically increasing the cooling capacity for massive continuous power; big aluminum end tanks won't burst like the plastic stock ones. (Note: Fits Trucks Built In 1999)
Techni-Cooler Upgrade System with Boost Tubes for use with 1999.5-2003 Ford 7.3L
Fitment Notes: 1999 - Ford - F-250 1999 - 2003 - Ford - F-450 Super Duty 1999 - 2003 - Ford - F-550 Super Duty 1999 - Ford - F-350 2000 - 2003 - Ford - F-350 Super Duty 2000 - 2003 - Ford - F-250 Super Duty 2000 - 2003 - Ford - Excursion
WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering
Banks Engineering