BDS Suspension

BDS - 3 Inch Lift Kit W/ Radius Arm - Fox 2.0 Shocks & Fox 2.5 Coil-Over Conversion - 2023-2024 Ford F250/F350 4WD 2201FPE

0 review Write a Review
SKU: BDS2201FPE
$4,351.56
$4,580.59
Free Ground Shipping (Continental US)

Short Description

Hurry up! Current stock:
3 Inch Lift Kit W/ Radius Arm - Fox 2.0 Shocks & Fox 2.5 Coil-Over Conversion - 2023-2024 Ford F250/F350 4WD

Part # 2201FPE

Kit Includes:

1 BDS013108 2017-2024 F250/F350 1" Rear Block Kit
1 BDS013261 2020-2024 F250/350 2.5" Front Box Kit
1 BDS123263 2023-2024 Ford F250/350 4wd Radius Arm Kit, Pair
1 BDS123613 2017-2024 Super Duty Coil-over Mount Kit
1 FOX88406426 Kit: BDS 2005-On Ford SD Front Coilover, 2.5 Truck PES, R/R 2.5" Lift, DSC
1 FOX98224710 Fox 2.0 Shock 23.27 x 14.65 x 2- S50/EB1
1 FOX98224717 Fox 2.0 Shock 30.05 x 18.45 x 2- EB1/EB1

 

Built to Outperform, take your 23-24 Ford Super Duty diesel powered truck with this 3-inch radius arm lift kit with FOX 2.5 Performance Elite Coil-over shocks from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy duty replacement radius arms, high strength 1-3/8 inch solid steel track bar for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of FOX 2.0 Performance shocks.

 

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

 

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

 

HD Adjustable Track Bar

Maintain proper handling and steering geometry with the BDS high strength adjustable track bar that allows you to recenter the front axle at a variety of lift heights. Built from 1-3/8" solid steel stock, the track bar comes pre-assembled with bushings and is ready to bolt into the factory mounting points.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs ride smooth through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Adjustable solid steel track bar designed to recenter the front axle
  • Fabricated steel blocks provide level stance from front to rear
  • FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 17 x 9 and 5 in. Backspace
  • 35 x 12.5 with 18 x 9 and 5 in. Backspace
  • 35 x 12.5 with 20 x 9 and 5 in. Backspace

Important Notes:

  1. Vehicles with radius arm mounted ride height sensors will require BDS123303.
  2. Designed for use on diesel models, but can be installed on gas trucks, will achieve additional 1/2 inch front ride height
  3. Installation requires a torque wrench capable of 406 ft-lbs.
  4. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
  5. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
  6. Trucks without top mounted overload spring will require (x4) UBT4031 available to purchase separately.

Est. Install Time :

6 hrs

Difficulty Level :

Difficult

Specialty Tools Needed :

30mm Socket, Torque Wrench, Drill / Bit Set, Pitman Arm Puller, Reciprocating Saw

 

Year Make Model Submodel Drive Type Fuel Type Position Lift Height
2023 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2023 Ford F-350 Super Duty ALL 4WD ALL ALL ALL
2024 Ford F-250 Super Duty ALL 4WD ALL ALL ALL
2024 Ford F-350 Super Duty ALL 4WD ALL ALL ALL

WARNING : This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov