Industrial Injection - Reman 15% Over Dragon Fly Performance Injector - 07-10 LMM Duramax 6.6L 0986435520SEDFLY

Part # 0986435520SEDFLY

This Dragon Fly series nozzle has been extruded / honed twice for a 15% (Approximately +50HP) gain over stock.

We usually see a drop in EGT's along with a gain in MPG's. We recommend these injectors to anyone needing to replace their current injectors and are looking to gain some performance from their truck. You can run these injectors with a stock turbo system but one of Industrial's Phatshaft turbos or a compound turbo setups would be a great match.

You may have noticed that there are two types of remanufactured injectors that Industrial Injection offers ~ Either "Factory Reman" or "II Reman".

Factory Re-manufactured means that a Genuine Bosch re-manufactured stock injector is used as the base injector and then a freshly extruded/honed Industrial Injection nozzle is installed and calilbrated to give you your desired percentage/HP over stock.

II or Industrial Injection Reman means that Industrial Injection uses the cores that are available to them or you send in your old injectors to rebuild. They then install their nozzles and calibrate to achieve your requested HP gains. They usually have plenty of cores to rebuild but sometimes will require you to send in yours to rebuild. The part numbers for those injectors are denoted with an "SE" near the end. If you are interested in having them rebuild your injectors this is a great way to have them done and bypass having to pay a core charge. Contact us on our toll free 1(800)823-4444 to check availability or arrange a rebuild!