Industrial Injection - Reman 75% Over R5 Performance Injector - 07-10 LMM Duramax 6.6L 0986435520SE-R5

Part # 0986435520SE-R5

This R-Series (RACE) injector's nozzle has been extruded / honed twice for a 75% (30 LPM) gain over stock.

Injectors such as these should only be used on a truck that has been highly modified to handle them. Upgraded intake, exhaust, fuel pump, electronic tuning, etc... With much increased torque and HP you should also not overlook your transmission, torque converter. Upgrades such as hardened steel bolt kits to allow your engine to withstand these higher stress levels are highly recommended.

You may have noticed that there are two types of remanufactured injectors that Industrial Injection offers ~ Either "Factory Reman" or "II Reman".

Factory Re-manufactured means that a Genuine Bosch re-manufactured stock injector is used as the base injector and then a freshly extruded/honed Industrial Injection nozzle is installed and calibrated to give you your desired percentage/HP over stock.

II or Industrial Injection Reman means that Industrial Injection uses the cores that are available to them or you send in your old injectors to rebuild. They then install their nozzles and calibrate to achieve your requested HP gains. They usually have plenty of cores to rebuild but sometimes will require you to send in yours to rebuild. The part numbers for those injectors are denoted with an "SE" near the end. If you are interested in having them rebuild your injectors this is a great way to have them done and bypass having to pay a core charge. Contact us on our toll free 1(800)823-4444 to check availability or arrange a rebuild!

LPM - Sometimes a rating of LPM is shown in the description of an injector or nozzle. LPM stands for Liters Per Minute. This is just the rating to show the highest potential flow at full fuel pressure and open throttle.