S&B - 60 Gallon High-Capacity Fuel Tank - 1999-2007 Ford 7.3L 6.0L Power Stroke CC SB - 10-1011

Part # 10-1011

DOUBLE YOUR RANGE

S&B's 60-gallon fuel tank directly replaces the OEM 29-gallon tank without any cutting, drilling, or special modifications. This makes for a trouble-free, faster installation process. S&B's replacement fuel tank holds 9 more gallons than competitor tanks allowing you to save time, go further, and get more out of your truck!

TRANSFER PUMP & AFTERMARKET LIFT PUMP

This tank features a built in sump which can be used for aftermarket lift pump installation, if desired. S&B recommends aftermarket lift pumps be installed according to the pump manufacturer's instructions only. The S&B sump will not cure typical "1/4 tank issues"  common with aftermarket lift pumps. S&B sump fittings are required to be used to prevent leaking.

Important Notes: The nozzle at high-flow fuel stations(truck stops) will not be able to fill automatically. This tank holds approximately 60 gallons of fuel. The float's empty position in the S&B Tank is the same as the OEM tank. Since the bottom surface area on the S&B Tank is larger, the 60 Gallon tank with have a greater fuel reserve. The S&B tank reuses the OEM sending unit. 

If your truck has the V shaped crossmember connected to the carrier-bearing crossmember(see important note in instructions), the S&B Tank will not fit with this in place.

S&B Sump Fittings/Drain Plug fittings are required when using our sump feed/return port or after drilling out the bottom port to use as a drain. Fittings are under related products.
Do you have an Auxiliary Fuel Tank?  Read why  using these with our tanks will void the Lifetime Warranty.