Hamilton Cams - Flat Tappet Conversion - 2019-2024 Dodge RAM 6.7L Cummins
Part # 07-CC24V19+
This kit replaces the problematic factory hydraulic roller lifters and camshaft to a reliable flat tappet. It is 49 state certified. We are confident it would pass CARB testing, but we don’t do business in California. This kit will fit and is certified for all Ram 2019-2024 2500 and 3500 diesels not in California.
People have noticed an increase in spool up and throttle response, fuel economy and EGT, all on stock vehicles with OEM tuning and all emission equipment present.
It comes with
- 178/208 Forged camshaft
- DLC coated steel tappets
- upgraded pushrods
- Adjustable rocker arms with DLC coated trunnions
Notes:
If you have had your block or head surfaced, please call for fitment verification.
We suggest Valvoline premium blue 15w-40 for warm weather operation or Valvoline 5w-40 for cold weather operation. Alternatively, Schaeffer 700 series is a great oil.
About the components
At Hamilton Cams our slogan is “innovation slightly faster than imitation” because we are copied…. a lot. Because of this, wanted to inform you about the benefits of our kit. We hope they earn your business. When you buy this kit, you are leaning on decades of research and a dedicated team of engineers and suppliers. This cam kit is the result of thousands of camshafts, thousands of dyno tests and tens of millions of miles our cams have run.
All of our 178-208 steel cams are formed via forging. This provides even tighter grain structure and a halo of grain that mimics a shell on the exterior of the cam that provides additional strength and better longevity. Most steel cams are usually not forged but made from bar stock which has a less homogeneous grain structure. Our tappets are Gas carburized, then polished and DLC coated for longevity. If it is not DLC coated, beware. The pushrods have over 3500Lbs of buckling force compared to around 1800lbs for the OEM pushrods. This reduces deflection at higher cylinder pressures and keeps valve timing where it was designed. The rocker arms are a high-quality casting with Gas carburized ball and foot and a DLC coated trunnion. OEM trunnions gall and are a point of a lot of friction. This kit is certified for 49 state compliance due to our Sema Certification testing.
It is a high form of praise to be copied.
